SENERTEK castable resin ?

[naoto]

Hello guys,

Is there anybody uses "SENERTEK castable resin" ?
http://www.senertek.com/3d/

Now I'm trying 30Micron/3sec, Base 15sec x 4times.
looks good.

but this resin is very fast curing, and it seems it has some generating fever when exposuring UV light.
I think It needs little bit careful.

I want to know best exposure time etc...
Is there any information ?

Thanks.

Naoto, Japan

[Chalamba]

Thank you for sharing, Naoto!
Have you tried casting it?
What does it cost?
Kindest regards!

[kostyo]

I still have half a bottle at home .....

it is well printed, but it is not good to cast well because it has many ashes.

it's a waste of time ....

but if you do well to burn it
  so please let me know at least I use half a bottle ....

I've tested senertek, bluecast, FTD deepblack, Epic M .... the best Epic

but I'm still going to try B9 green or yelow

[naoto]

Hello guys,

My report here.

I did not cast this prints.
* because After printing, it cracks so hardly ....


It can not use to cast.
and Resin vat got damage, Acyl body has some crack.

　I don't recommend to use this resin. I quit to use.


but, this resin can cure very fast and beautiful, nothing error, no failed.
If you are using Aluminum vat, I guess there is a chance to use.
and price is very low.


> but I'm still going to try B9 green or yelow
Yes, me too.
I also tried "maker juice cast resin", but silver-casting is failed by many ashes.
surface is noised, and detail is dead by plaster cracks.

Thanks.

[M-Williams]

Just use cherry resin, It casts perfect. In my opinion it is the easiest resin for casting . just shake it well before use .

[naoto]

Do you mean B9C Cherry?

Just use cherry resin, It casts perfect. In my opinion it is the easiest resin for casting . just shake it well before use .

[M-Williams]

Yes.

[eangor]

Yes.

Does it cure and cast the same way as Emerald? Thank you for your advice.

[M-Williams]

Prints and casts great. Just shake it well before use. Cure it well like any other resin. Marc.