I came across new resins posted on the B9 site, called B9R-3 Emerald Resin, and B9R-4 Yellow. They are boasting the yellow is the ultimate casting resin, saw some results posted on the b9 site. Claims, satin cast-20 and scrap metal, looks pretty darn good.
Anybody, Anybody any thoughts?
New B9 Resins
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
Re: New B9 Resins
Mine will be here Wednesday, If I can get it to print I cast Thursday.
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Re: New B9 Resins
Did you order the Emerald or the Yellow?
I have been told most of my issues are resin based problems, so until the specially formulated
Solus resin is available, to get better prints I am very interested?
Toddmichael
I have been told most of my issues are resin based problems, so until the specially formulated
Solus resin is available, to get better prints I am very interested?
Toddmichael
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
Re: New B9 Resins
I ordered the yellow. I have my Solus for 2 months and used 2/3 of the cherry. I would like to use two different resin.
Re: New B9 Resins
I received my yellow order ... hopefully will have some real world results to show by the weekend
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: New B9 Resins
Sounds good. Maybe you can also share your settings and we can make a profile available for people to download.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: New B9 Resins
mongerdesigns wrote:Sounds good. Maybe you can also share your settings and we can make a profile available for people to download.
If i get to settings that work consistently for me I will post them
Re: New B9 Resins
Sadly haven't had much luck so far
This is at 85% the exposure time of cherry with supports that worked for Cherry
Re: New B9 Resins
KBS756 wrote:
Sadly haven't had much luck so far
This is at 85% the exposure time of cherry with supports that worked for Cherry
Anyone got any ideas?
Re: New B9 Resins
Received mine today. This is what I'm thinking
If I can remember by math
Cherry exposure factor
12.01765853 /25 =.480763412 per layer B9
This equals Solus 2800 ms 25 microns
Yellow exposure factor
7.6410228 /20 =.382080114 per layer
.382080114* 25 = 9.55202285
9.55202285 / 120165853 = .79483060915
about little more than 20% of 2800ms 2240 ms??
I'm only guessing on all of this
If I can remember by math
Cherry exposure factor
12.01765853 /25 =.480763412 per layer B9
This equals Solus 2800 ms 25 microns
Yellow exposure factor
7.6410228 /20 =.382080114 per layer
.382080114* 25 = 9.55202285
9.55202285 / 120165853 = .79483060915
about little more than 20% of 2800ms 2240 ms??
I'm only guessing on all of this
- Attachments
-
- Yellow.JPG (46.51KiB)Viewed 15537 times
-
- Cherry.JPG (45.35KiB)Viewed 15537 times
Who is online
Users browsing this forum: No registered users and 154 guests