New B9 Resins

[KBS756]

Received mine today. This is what I'm thinking
If I can remember by math
Cherry exposure factor
12.01765853 /25 =.480763412 per layer B9
This equals Solus 2800 ms 25 microns

Yellow exposure factor
7.6410228 /20 =.382080114 per layer
.382080114* 25 = 9.55202285
9.55202285 / 120165853 = .79483060915
about little more than 20% of 2800ms 2240 ms??

I'm only guessing on all of this

Will try that for now ... Emil said maybe i should try increasing the exposure so just trying Yellow at Cherry's settings this time ... though wonder if a fail can occur due to over exposure

[KBS756]

Received mine today. This is what I'm thinking
If I can remember by math
Cherry exposure factor
12.01765853 /25 =.480763412 per layer B9
This equals Solus 2800 ms 25 microns

Yellow exposure factor
7.6410228 /20 =.382080114 per layer
.382080114* 25 = 9.55202285
9.55202285 / 120165853 = .79483060915
about little more than 20% of 2800ms 2240 ms??

I'm only guessing on all of this

Will try that for now ... Emil said maybe i should try increasing the exposure so just trying Yellow at Cherry's settings this time ... though wonder if a fail can occur due to over exposure

Figured at Cherry's it should at least gimme a solid result

[EddyF]

I tried printing the cherry setting, i guess over exposed

[reify]

One of our customers is already getting good prints with the yellow and said he'll share the settings tomorrow.

[mongerdesigns]

Eddy, it would help if you post pictures. The b9 yellow is untested resin. I suggest waiting until we have time to test it and if it works well release a resin profile for CW.

[KBS756]

Eddy, it would help if you post pictures. The b9 yellow is untested resin. I suggest waiting until we have time to test it and if it works well release a resin profile for CW.

Hopefully someone will have reliable prints and you'll have a good profile soon ... Ive frustrated myself quite a bit trying this the last couple of days ...

[mongerdesigns]

Eddy, it would help if you post pictures. The b9 yellow is untested resin. I suggest waiting until we have time to test it and if it works well release a resin profile for CW.

Hopefully someone will have reliable prints and you'll have a good profile soon ... Ive frustrated myself quite a bit trying this the last couple of days ...

That's the nature of trying to experiment with something new. Better stick with something that works for now. Are you having casting issues with cherry? Is that the reason why you wanted to try the yellow?

[EddyF]

Here is how I have it set up. I did have a small one print twice, the failure was flat to the build plate when printed.

[KBS756]

Eddy, it would help if you post pictures. The b9 yellow is untested resin. I suggest waiting until we have time to test it and if it works well release a resin profile for CW.

Hopefully someone will have reliable prints and you'll have a good profile soon ... Ive frustrated myself quite a bit trying this the last couple of days ...

That's the nature of trying to experiment with something new. Better stick with something that works for now. Are you having casting issues with cherry? Is that the reason why you wanted to try the yellow?

yea we still unfortunately cast outside with casting companies who dont really give us any special consideration for cherry ...

Hoping to cast ourselves by some point next year

[KBS756]

Here is how I have it set up. I did have a small one print twice, the failure was flat to the build plate when printed.

That fail print looks a lot like some of my fails but my supports go up a bit before they start to fail ...