coagulacion de la resina en torno al modelo impreso.
Durante el proceso de impresion y prueba de la resina solusCast, aderida a los modelos impresos, habia una masa que parecia ser un impresion fallida. pero era una especie de recina coagulada alrededor del modelo.
https://drive.google.com/file/d/1CPkhWC ... sp=sharing
con unas peliculas como capa en los soportes.
https://drive.google.com/file/d/1-taHU- ... sp=sharing
¿Que es lo que susede, es normal?
https://drive.google.com/file/d/1XzhMOH ... sp=sharing
coagulation of the resin around the printed model.
During the process of printing and testing the solusCast resin, added to the printed models, there was a mass that appeared to be a failed print. but it was a kind of coagulated recine around the model, with some films as layer on the supports.
What does it mean, is it normal?
coagulacion de la resina en torno al modelo impreso. coagulation of the resin around the printed model.
-
- Novice
- Posts:15
- Joined:Tue Jul 19, 2016 3:02 am
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: coagulacion de la resina en torno al modelo impreso. coagulation of the resin around the printed model.
Check your full rgb settings.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 10 guests