Solus Wax Resin

Discuss 3d printing resins
User avatar
CADjewelrySchool
Novice
Posts:71
Joined:Wed Sep 16, 2015 10:28 am
Re: Solus Wax Resin

Postby CADjewelrySchool » Wed Aug 01, 2018 11:01 pm

Alexpolo wrote:I cant get Lattice to work

Hey Alex, did you figure it out?
Alexpolo
Novice
Posts:14
Joined:Sun Nov 22, 2015 9:21 am

Re: Solus Wax Resin

Postby Alexpolo » Fri Aug 03, 2018 8:53 am

Still no go - I freshly imported STL and hit lattice but nothing comes up.

Any clues to why the feature is not visible.

Capture.JPG
User avatar
reify
Site Admin
Posts:571
Joined:Mon Mar 16, 2015 6:10 pm

Re: Solus Wax Resin

Postby reify » Fri Aug 03, 2018 11:31 am

If the object has its own support(s), first set the Lift Height to 0 in the Auto Supports menu.

Lift Height.png
Lift Height.png (15.48KiB)Viewed 13881 times
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Fri Aug 03, 2018 6:13 pm

castings
Attachments
20180803_115908.jpg
20180803_115838.jpg
20180803_115715.jpg
20180803_115639.jpg
20180803_120729.jpg
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Fri Aug 03, 2018 6:14 pm

casting
Attachments
20180803_120406.jpg
20180803_120308.jpg
20180803_120206.jpg
20180803_120134.jpg
20180803_115938.jpg
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Fri Aug 03, 2018 6:15 pm

last one
Attachments
20180803_120452.jpg
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Solus Wax Resin

Postby M-Williams » Fri Aug 03, 2018 8:38 pm

A good casting machine can make a world of difference. Few extra degrees can overheat your gold alloy and make you casting porous. Casting with a torch is simply hit and miss. Any jeweler who wants to step up his quality work, either has to work with a service bureau or invest in a proper casting machine. In the long run, you will save time, money and a lot of headaches. Marc
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Fri Aug 03, 2018 10:54 pm

make no mistake , I will use these castings , this will take me about 20 min. on my laser for both touch ups , but these are my results , still need to tweek
wawatobi
Novice
Posts:71
Joined:Tue Nov 24, 2015 9:56 am

Re: Solus Wax Resin

Postby wawatobi » Thu Aug 30, 2018 12:49 pm

I grew a few models in the SolusWax. The models came out great but...... I had grown two of the models with soluscast
a day earlier and when I compared them the shrinkage between the two resins was 8 and 12 percent. That's extreme. I'm hoping that the shrinkage occurred during the 20 minutes under my 20 watt UV lamp. I'm growing the same two models to see how they measure without the UV cure. Results posted later today...
joeyalbano
Novice
Posts:50
Joined:Mon Apr 25, 2016 3:49 pm

Re: Solus Wax Resin

Postby joeyalbano » Thu Aug 30, 2018 1:57 pm

Hi Guys,

Anybody have a solution to my problem?
Attachments
Soluswax.jpg

Who is online

Users browsing this forum: No registered users and 16 guests