Solus Wax Resin
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
If you leave the resin in the vat on your printer, then get a piece of cardboard or something cut to size to cover it up. Do this only if you plan on printing next day or two. Any longer pour it out into a separate container. Don't know about the newer SWax, but the first batch I would have cured resin in the cap of bottle. It doesn't take much light and air to cure it.
Re: Solus Wax Resin
Since it was asked in a previous post, I thought I would share our first platinum cast with the Soluswax. Came out just fine. Wasn't expecting any issues since our Gold castings with the material have been just fine. For investment we used the R&R Plasticast PT. I also attached a picture of the burnout we used in case any one wanted that info.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
That looks great.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
Looking great, Roger. Any castings?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Solus Wax Resin
maybe Fri,
is that how the lattus supp to be ?
what can I do about that line mid way for next time ?
is that how the lattus supp to be ?
what can I do about that line mid way for next time ?
Re: Solus Wax Resin
I cant get Lattice to work - I have some trouble with prints adhering to table. Import models - goto manual supports and on SOLUSWAX resin profile.
Any advice
thanks
Any advice
thanks
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
rsaldivar wrote:maybe Fri,
is that how the lattus supp to be ?
what can I do about that line mid way for next time ?
Yes, that's how the lattice is. Not sure about the line, but it's possible the printer got bumped?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
You're looking from the bottom view. We hide it from view when you look from that angle. Look from the top or normal view.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 9 guests