Page 10 of 19
Re: Solus Wax Resin
Posted: Fri Jun 22, 2018 4:59 pm
by rsaldivar
so Ill try it at an angel , if it prints well , Ill know SW cant do flats in the same way the green and the blue can ?
Re: Solus Wax Resin
Posted: Sat Jun 23, 2018 1:02 am
by rsaldivar
Also , can you explain why no water ? Emil
Re: Solus Wax Resin
Posted: Mon Jun 25, 2018 6:50 pm
by mongerdesigns
rsaldivar wrote:Also , can you explain why no water ? Emil
That is the recommendation from the chemists. If you want to use water, that's up to you, but may affect the casting.
Re: Solus Wax Resin
Posted: Wed Jun 27, 2018 6:07 pm
by printcast
What is holding up the sample bottles? If I send in a bottle can I get a sample?
My problem is that I've purchased "castable" resin in the past that nobody was getting to cast well. The manufacturer would not allow returns.
Re: Solus Wax Resin
Posted: Wed Jun 27, 2018 6:50 pm
by mongerdesigns
printcast wrote:What is holding up the sample bottles? If I send in a bottle can I get a sample?
My problem is that I've purchased "castable" resin in the past that nobody was getting to cast well. The manufacturer would not allow returns.
You're gonna have to wait until we fulfill all the original orders first. Shouldn't be long now. Maybe early next month we will have sample bottles available.
Re: Solus Wax Resin
Posted: Sat Jun 30, 2018 5:56 pm
by mongerdesigns
Just a heads-up that we now offer samples size bottles for SolusWax.
http://www.junction3d.com/buy/soluswax-resin
Re: Solus Wax Resin
Posted: Sat Jun 30, 2018 6:08 pm
by rkundla
That was quick.
Re: Solus Wax Resin
Posted: Sun Jul 01, 2018 4:09 am
by printcast
Awesome.
I will order mine this weekend.
Re: Solus Wax Resin
Posted: Tue Jul 03, 2018 9:33 pm
by Dave D
My first grow came out great bur after curing it turns white. Is this normal? I am using an otto flash unit to cure this is around 12000 flashes.
Re: Solus Wax Resin
Posted: Tue Jul 03, 2018 10:38 pm
by mongerdesigns
Lol. Haven't seen that, but it just means that you have one hell of a curing unit!
Probably way overkill to cure it that much. Should be fine though. Next time, do 1/10 of the curing that you did on that one.
This resin doesn't need any curing really. We cure for 20-30 min in our UV curing unit.