ccw easycast resin looking for info

Discuss 3d printing resins
mredburn
Novice
Posts:29
Joined:Wed Jul 01, 2015 12:39 pm
ccw easycast resin looking for info

Postby mredburn » Tue Jan 08, 2019 9:23 pm

any links or information on the burnout, clean up ,and curing of the ccw easycast HD resin?
User avatar
Messerbr
Solus Expert
Posts:163
Joined:Tue Jan 05, 2016 2:54 pm
Location:North Carolina
Contact:

Re: ccw easycast resin looking for info

Postby Messerbr » Tue Jan 08, 2019 9:34 pm

User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: ccw easycast resin looking for info

Postby mongerdesigns » Tue Jan 08, 2019 10:58 pm

There are two manufacturer recommended burnouts:

Standard Burnout - https://www.dropbox.com/s/lxqf14lrxalos ... d.pdf?dl=0

Direct Ramp-up Burnout - https://www.dropbox.com/s/1imyxxfnm6iy7 ... p.pdf?dl=0
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
rkundla
Solus Master
Posts:308
Joined:Sat Jan 09, 2016 6:01 am

Re: ccw easycast resin looking for info

Postby rkundla » Tue Jan 08, 2019 11:11 pm

Do those charts really say -2°C/minute? :o
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: ccw easycast resin looking for info

Postby mongerdesigns » Tue Jan 08, 2019 11:24 pm

Just got the charts from ResinWorks. I'm guessing it's 2C per minute, not -2C per minute.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 3 guests