Emerald resin

[wawatobi]

I've bee trying the emerald resin. I find less mis-prints but I'm not getting the resolution that I've seen on this site. I'm just wondering if you use a finerZ slice. Also, I wonder if the 100 percent isopropyl is too strong. I'm getting smoother surface with the cherry.

[Jewelermdt]

I getting fairly smoot prints with the green. You are using the Green Profiles with CW? Make sure you click apply changes when selecting.

[reify]

Also check you've selected the emerald profile when you slice. It should change this automatically though.

[wawatobi]

I cut the slice thickness to .025 and got smoother results. Also, I don't wash in isopropyl alcohol as long. Great results.