http://www.makerjuice.com/shop/waxcast/
This looks interesting. They say it is tested on the Solus. I like the price and the color change when fully cured thing.
I was going to order the emerald resin when my cherry runs out but maybe this will be better.
WaxCast resin
Re: WaxCast resin
They show settings for Solus.
Emil may have to fine tune and publish a profile to download.
Emil may have to fine tune and publish a profile to download.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: WaxCast resin
They have published some settings on their website. I believe it's for 25xy30z microns.
The resin is dirt cheap enough to buy a small bottle and experiment with.
Not sure how well it casts though
The resin is dirt cheap enough to buy a small bottle and experiment with.
Not sure how well it casts though
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: WaxCast resin
Surprised to see the top temp for burnout was 1200 degrees F. Even for my mill wax I've use 1300.
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
Re: WaxCast resin
The Yellow resin is excellent for casting. If you can cast the cherry,The yellow is a step better. needless to remind that curing is the primary condition to a successful Casting.
Who is online
Users browsing this forum: No registered users and 150 guests