hello, I have not been with me the impression WaxCast, according to the parameters given at the beginning of this post. I have had partial results using the resin WaxCast MJ only using the parameters using emerald B9 resin.
hola, a mi no me ha resultado la impresion con la WaxCast, segun los parametros entregados al inicio de este post. He tenido resultados parciales usando la resina WaxCast de MJ solo usando los parametros que usa la resina B9 esmeralda.
MakerJuice WaxCast Resin
-
- Novice
- Posts:15
- Joined:Tue Jul 19, 2016 3:02 am
Re: MakerJuice WaxCast Resin
Hi Claudio,
Have you removed the UV filter?
Have you removed the UV filter?
-
- Novice
- Posts:15
- Joined:Tue Jul 19, 2016 3:02 am
Re: MakerJuice WaxCast Resin
reify wrote:Hi Claudio,
Have you removed the UV filter?
Yes, i am removed
achieve print this tower, but were two, the other is an inert mass at the bottom of the container
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: MakerJuice WaxCast Resin
Ha. Nice!
You used the emerald settings to print with waxcast.
You used the emerald settings to print with waxcast.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:15
- Joined:Tue Jul 19, 2016 3:02 am
Re: MakerJuice WaxCast Resin
if, achieved print something with that configuration. to the use the configuration of jm wax cast, alone was the bases of the layer initial, so that probe with each configuration that proposes in team and me gave result with the b9 emerald.
Si, logre imprimir algo con esa configuración. Al usar la configuración de JM Wax Cast, solo quedaba las bases de los layer iniciales, asi que probe con cada configuración que propone en equipo y me dio resultado con la B9 Esmeralda.
Translate by: Google Translate
Si, logre imprimir algo con esa configuración. Al usar la configuración de JM Wax Cast, solo quedaba las bases de los layer iniciales, asi que probe con cada configuración que propone en equipo y me dio resultado con la B9 Esmeralda.
Translate by: Google Translate
Re: MakerJuice WaxCast Resin
Does anyone have a reliable way to get wax cast to stick to the build table ... on larger items it falls off infuriatingly for me ...
Trying to get it to work for certain pieces that we want to wax set due to their very light gold (and thus very thin)
Thanks
Trying to get it to work for certain pieces that we want to wax set due to their very light gold (and thus very thin)
Thanks
Re: MakerJuice WaxCast Resin
I had more success with WaxCast when I made the raft or base larger than the default if using CW to make the raft. The more surface area it is attached to, the better the chance it will hold on.
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
Re: MakerJuice WaxCast Resin
KBS756 wrote:Does anyone have a reliable way to get wax cast to stick to the build table ... on larger items it falls off infuriatingly for me ...
Trying to get it to work for certain pieces that we want to wax set due to their very light gold (and thus very thin)
Thanks
I assume that you have to print with a base. Make your supports are conical shape. You might also tweak you exposure.
Who is online
Users browsing this forum: No registered users and 1 guest