Hybrid Resin Blend (WaxCast and Emerald)

Discuss 3d printing resins
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby mongerdesigns » Tue May 24, 2016 7:08 pm

Joetrfj wrote:Would the same method apply for cherry 50:50? With adjusted base and layer exposure?


Cherry and red 50:50 is not capable of supporting the high resolutions we are outputting. Use cherry by itself.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Joetrfj
Novice
Posts:39
Joined:Wed Jan 06, 2016 6:29 pm
Location:UK
Contact:

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby Joetrfj » Wed May 25, 2016 8:20 am

mongerdesigns wrote:
Joetrfj wrote:Would the same method apply for cherry 50:50? With adjusted base and layer exposure?


Cherry and red 50:50 is not capable of supporting the high resolutions we are outputting. Use cherry by itself.



Sorry, I meant wax cast and cherry 50:50?
User avatar
jdwages
Novice
Posts:38
Joined:Mon Aug 24, 2015 5:09 pm
Location:Gulfport Mississippi

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby jdwages » Wed May 25, 2016 4:05 pm

Emil I have been having some flashing also. Any idea on what setting should be lowered to. I am using the profile for B9 emerald. Thanks
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby mongerdesigns » Wed May 25, 2016 5:39 pm

jdwages wrote:Emil I have been having some flashing also. Any idea on what setting should be lowered to. I am using the profile for B9 emerald. Thanks


Check that the RGB setting is still on full. If it is, lower the bottom exposure a bit, until you have no flashing. If you have some photos of the flashing, email them to me.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Joetrfj
Novice
Posts:39
Joined:Wed Jan 06, 2016 6:29 pm
Location:UK
Contact:

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby Joetrfj » Wed May 25, 2016 7:07 pm

Joetrfj wrote:
mongerdesigns wrote:
Joetrfj wrote:Would the same method apply for cherry 50:50? With adjusted base and layer exposure?


Cherry and red 50:50 is not capable of supporting the high resolutions we are outputting. Use cherry by itself.



Sorry, I meant wax cast and cherry 50:50?
User avatar
reify
Site Admin
Posts:571
Joined:Mon Mar 16, 2015 6:10 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby reify » Thu May 26, 2016 3:29 am

Joetrfj wrote:
Joetrfj wrote:
mongerdesigns wrote:
Cherry and red 50:50 is not capable of supporting the high resolutions we are outputting. Use cherry by itself.



Sorry, I meant wax cast and cherry 50:50?


If anybody has some extra cherry would they mind mixing it with some waxcast to see how it prints.
samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby samatheang » Fri May 27, 2016 6:55 pm

Could anyone share the burning schedule for the hybrid please? Also, how long does it take to cure the Hybrid? Thank you.
lklutts
Solus Expert
Posts:124
Joined:Thu Jul 16, 2015 8:48 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby lklutts » Sat May 28, 2016 2:50 am

Not saying I have it down, but getting a grasp on it. I use the green settings for growing. I will post later my machine it's running. I have been curing in uv lamp for an hour or so.Then into my lizard lamp I got from pet mountain. 100 watt, heat,uv and ir. At the height of the box, high tech me, it goes to 150-160. I leave it till it looks cured some an hour, some three. Turn it a couple times to keep it even.
300 1.5 hours
800-2 hours
1350 3 hours
Back to soak temp
vacuum and cast
KBS756
Novice
Posts:69
Joined:Thu Oct 08, 2015 3:42 am

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby KBS756 » Sat May 28, 2016 4:16 am

Has anyone tried printing say 25:75 Emerald : WaxCast or even 10:90 Emerald:Waxcast to see if one can get away with support and such issues while still retaining the wax characteristics of Wax cast?

I'm going to try it this weekend .. what settings would be a good starting point for hybridizing to this degree?
Joetrfj
Novice
Posts:39
Joined:Wed Jan 06, 2016 6:29 pm
Location:UK
Contact:

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby Joetrfj » Sat May 28, 2016 11:07 am

Is 50:50 or 60:40 green and WC the most stable?

Who is online

Users browsing this forum: No registered users and 8 guests