Emerald green resin from b9_first try
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
I got my printer set up. Mechanically every thing appears to be working correctly. The resin is not curing and building the model. I removed the UV lens from the projector and believe I did all the setups. What do I need to check?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Emerald green resin from b9_first try
Nothing is curing? That's impossible, unless the UV filter (the one on the bulb) is still on there.
Did you remove the orange shutter from infront of the printer window?
Check the inside of your resin tank. Is there something cured there?
Did you remove the orange shutter from infront of the printer window?
Check the inside of your resin tank. Is there something cured there?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Emerald green resin from b9_first try
The orange shutter has been removed, the UV filter was removed like Appendix I and nothing is cured in the tank. Are there slice setting I need to change?
Slice thickness .030
exposure time is 2800
bottom exposure is 16000
bottom layer 3
enable slice 4
Slice thickness .030
exposure time is 2800
bottom exposure is 16000
bottom layer 3
enable slice 4
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Emerald green resin from b9_first try
Are you sure the projector is even projecting? Can you see the layers being projecting at even intervals?
Maybe your DISPLAY number is different, and it's not outputting through the projector.
Your settings look correct, so it would be technically impossible for nothing to cure in the tank, if light is projected in there.
Maybe your DISPLAY number is different, and it's not outputting through the projector.
Your settings look correct, so it would be technically impossible for nothing to cure in the tank, if light is projected in there.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Emerald green resin from b9_first try
Kevin,
Email me (info@junction3d.com) on Tuesday morning and I can connect remotely to your laptop and help you.
Email me (info@junction3d.com) on Tuesday morning and I can connect remotely to your laptop and help you.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Emerald green resin from b9_first try
I'll email you on Tuesday. I can see the slice of the support in the vat coming from the projector.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Emerald green resin from b9_first try
Post a picture of your set up. You did calibrate the gird to the correct size? Focus turning the lens and fill gird to size using the Zoom.
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Emerald green resin from b9_first try
I focused and measured using a caliber just like in the video.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Emerald green resin from b9_first try
The problem was lack of proper supports and printing the grid at the same time as the model.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 20 guests