Form 2 castable resin

Gtg330 · Postby **Gtg330** » Thu Mar 16, 2017 10:08 pm

Has anyone use form2 Castable resin on the solus and gotten good results if so what settings do you use. Thanks for any help.

samatheang · Postby **samatheang** » Fri Mar 17, 2017 3:03 am

viewtopic.php?f=8&t=566&hilit=formlabs

eg123 · Postby **eg123** » Fri Mar 17, 2017 5:06 am

I tested formlabs castable 02 and it always had a little over exposure on ring models.
It works very well if you do flat models when you print flat on the plate.

Have not tried Blue Cast with the Solus but I think you may get better results with it.
I have heard that with Blue Cast you don't have to cure after printing and it also has a fast burnout cycle, people have had good results.
https://www.youtube.com/watch?v=lt9Xl9-FT1Q

Postby **mongerdesigns** » Fri Mar 17, 2017 5:25 am

Resins that are made for Laser-based SLA printers usually don't work well with DLP printers. Even if they do work, they are usually not designed for the extremely high resolutions that the Solus provides.

Gtg330 · Postby **Gtg330** » Wed Mar 22, 2017 5:25 pm

I bought the b9 emerald resin and have got good results so I just tried 2 with a mix of b9 emerald &I a little of form2 castable and have got some nice smooth prints. Going to play a little more and I will post some pics.

samatheang · Postby **samatheang** » Wed Mar 22, 2017 8:30 pm

Sound good. Can't wait for the pic. Thank you for sharing.

Gtg330 wrote:I bought the b9 emerald resin and have got good results so I just tried 2 with a mix of b9 emerald &I a little of form2 castable and have got some nice smooth prints. Going to play a little more and I will post some pics.

M-Williams · Postby **M-Williams** » Wed Mar 22, 2017 9:04 pm

I'm loving my castings with the cherry.

Form 2 castable resin

Re: Form 2 castable resin

Re: Form 2 castable resin

Re: Form 2 castable resin

Re: Form 2 castable resin

Re: Form 2 castable resin

Re: Form 2 castable resin

Who is online