B9R green coming out too thick
Can anyone explain to me why the B9R green resin is printing thicker than my designs? It's not that I don't like it but on some designs it fills in a little much...
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: B9R green coming out too thick
Make sure the bottle is mixed well. The pigment might settle on the bottom and then you will be getting overcuring. You can also decrease the exposure a bit to see if that brings back some of the details you lost.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: B9R green coming out too thick
Okay, will do, forgot about the mixing stuff!
Who is online
Users browsing this forum: No registered users and 9 guests