Introducing the SolusCast resin
When will this resin be available in canada?
Re: Introducing the SolusCast resin
Whats the burnout schedule on this like? does it work well for stone in place type casting? (assuming since its resin it won't melt around stones like wax?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Introducing the SolusCast resin
Recommended Investment: Kerr Satin Cast #20 for Platinum use we recommend Ultra-Vest.
1. Regular Castings Ladies Rings, Pendants, Filigree & Intricate Wax Patterns 40 ml water to 100 g powder
2. Heavy Castings Heavy Ladies Rings, Men’s Rings & School Rings 38 ml water to 100 g powder
3. 8 Hour Cycle (Round Flask: (89 x 100 mm)
4. 2 hours @ 300ºF/149ºC - Initial Wax and Water Elimination
5. 1.5 hours @ 725ºF/382ºC - Trapped Wax Elimination
6. 2.5 hours @ 1415ºF/768ºC - Wax Elimination
7. 1 hour @ 1220ºF/660ºC - Complete Elimination
8. 1 hour to Casting Temp
9. Casting
1. Regular Castings Ladies Rings, Pendants, Filigree & Intricate Wax Patterns 40 ml water to 100 g powder
2. Heavy Castings Heavy Ladies Rings, Men’s Rings & School Rings 38 ml water to 100 g powder
3. 8 Hour Cycle (Round Flask: (89 x 100 mm)
4. 2 hours @ 300ºF/149ºC - Initial Wax and Water Elimination
5. 1.5 hours @ 725ºF/382ºC - Trapped Wax Elimination
6. 2.5 hours @ 1415ºF/768ºC - Wax Elimination
7. 1 hour @ 1220ºF/660ºC - Complete Elimination
8. 1 hour to Casting Temp
9. Casting
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Introducing the SolusCast resin
What does the cool down from 1415 to 1220 buy you in terms of elimination of the ash from the resin?
This is the first time I've seen a staged drop from peak temperature to casting temperature.
This is the first time I've seen a staged drop from peak temperature to casting temperature.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Introducing the SolusCast resin
Wish I could tell you. It's a burnout developed for us by jewelryservices.com
They never miss with their castings. All perfect results, so must be doing something right
They never miss with their castings. All perfect results, so must be doing something right
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Introducing the SolusCast resin
How much heat (degrees) can SolusCast withstand when put in oven (for annealing) or in the vulcanizer (when making rubber molds) before skin starts to crack?
Re: Introducing the SolusCast resin
First Cast was amazing. Used exact recommended burnout and curing instructions. 14kt yellow gold it was a flawless casting. Trying some silver casting today
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Introducing the SolusCast resin
goldfish2 wrote:First Cast was amazing. Used exact recommended burnout and curing instructions. 14kt yellow gold it was a flawless casting. Trying some silver casting today
Great news Bill! Please post some pics if you can. You're using our UV curing unit correct?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Introducing the SolusCast resin
I'm having issues getting mine to print. It prints the supports great, but my models don't attache. Iv'e tried three times and get same results with different models. When I opened my bottle there was a lot of gummed up resin at the cap. Even after shacking. Been very busy the last few day and haven't had time to play. And now I may have to get ready for Irma, depending where it goes.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Introducing the SolusCast resin
How thin are the support tips? The initial supports that "hold" the model need to have thicker support tips. At least 0.3mm and ball tips.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 15 guests