yellow gold casting - "new" burnout
Posted: Tue Jun 05, 2018 4:30 pm
Hey!!
Thats the casting we made today - it came out flaweless.
Mention - The biggest setting has a diameter of just 6mm - the smalles around 3,5mm.
Good detail, and nice surface!
We decide to let the flask longer in the oven at 100°C and 180°C.
Total burnout:
2°C/min to 100 - hold 2 hours.
2°C/min to 180 - hold 2 hours.
9°C/min to 430 - hold 3 hours.
9°C/min to 800 - hold 3 hours.
down to casting temperature ( 500 °C.
Vacuum/Argon casting. ( Indutherm MC15+)
i hope this help you
Thats the casting we made today - it came out flaweless.
Mention - The biggest setting has a diameter of just 6mm - the smalles around 3,5mm.
Good detail, and nice surface!
We decide to let the flask longer in the oven at 100°C and 180°C.
Total burnout:
2°C/min to 100 - hold 2 hours.
2°C/min to 180 - hold 2 hours.
9°C/min to 430 - hold 3 hours.
9°C/min to 800 - hold 3 hours.
down to casting temperature ( 500 °C.
Vacuum/Argon casting. ( Indutherm MC15+)
i hope this help you