Not saying I have it down, but getting a grasp on it. I use the green settings for growing. I will post later my machine it's running. I have been curing in uv lamp for an hour or so.Then into my lizard lamp I got from pet mountain. 100 watt, heat,uv and ir. At the height of the box, high tech me, it goes to 150-160. I leave it till it looks cured some an hour, some three.
300 1.5
800-2
1350 3
Back to soak temp
The white gold inserts are 1mm size 11
Both came out nice.
That's my story and I am sticking to it
Casting with green and mj mix
Re: Casting with green and mj mix
Stick to that method. It works very well.
If you have heavy rings (for example) just turn them over so it cures evenly.
Because it gets hot at the bottom I lay the model on top of a piece of glass.
Here is my set up.
If you have heavy rings (for example) just turn them over so it cures evenly.
Because it gets hot at the bottom I lay the model on top of a piece of glass.
Here is my set up.
Who is online
Users browsing this forum: No registered users and 8 guests