Trouble casting resin model? read this....

[Jewelermdt]

Depends on metal your casting and how heavy a model. I use 1000 degrees F. I use vacuum cast, so I figure I'll loose several degrees before I pour metal. Most use somewhere between 800 to 1000 for casting temp.

[kyjeweler]

Depends on metal your casting and how heavy a model. I use 1000 degrees F. I use vacuum cast, so I figure I'll loose several degrees before I pour metal. Most use somewhere between 800 to 1000 for casting temp.

thanks for you reply
can you give me recommend on casting machine. my budget 5k
too many brand I don't know which one fit for me and never cast before so I don't know.

[lklutts]

I use the lucas dental centrifugal casting machine. $550.

[Jewelermdt]

I use something like this for casting and investing. http://www.gesswein.com/p-10338-t15-del ... chine.aspx

This is a nice burn out oven. http://www.gesswein.com/p-7821-ney-3-55 ... rnace.aspx

I use this http://www.gesswein.com/p-1612-ney-fiber-furnace.aspx with this so I don't have to babysit. http://www.gesswein.com/p-1620-kilnminder-4e.aspx. A little work in wiring the furnace to work with it. You have to disable everything but the heating coils. So it's best to purchase an ALL IN ONE unit.

You will have to send out platinum. I do very little and send my to Tech-Fourm

[kyjeweler]

thank you guys. thank you for your recommend. I will order it and practice for while and will be bother you guys in next time.
have a good day .