Casting SolusCast

Discuss casting techniques
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:
Re: Casting SolusCast

Postby Jewelermdt » Thu Sep 28, 2017 12:47 am

It might set up a little quicker. Least with Optima investment it does.
M.A.N
Novice
Posts:39
Joined:Fri Apr 15, 2016 4:54 pm

Re: Casting SolusCast

Postby M.A.N » Thu Sep 28, 2017 10:32 am

Hi
Six hour simple uv cure with six 8 watt uv lights
38:100 G3D SYNERGY investment
3 hour sit time
12 hours burnout cycle
Casting
I have a small bottle of soluscast.
I'm going to try to cast a full sc tree soon.
Most of your problems is from your investment.Change your investment if you can.
Attachments
Untitled.png
A.Joa1
Novice
Posts:54
Joined:Sat Dec 03, 2016 11:43 am

Re: Casting SolusCast

Postby A.Joa1 » Thu Sep 28, 2017 6:21 pm

Hey M.A.N

very nice!!!

Are you vacuum casting? VPC?
M.A.N
Novice
Posts:39
Joined:Fri Apr 15, 2016 4:54 pm

Re: Casting SolusCast

Postby M.A.N » Fri Sep 29, 2017 7:13 am

A.Joa1 wrote:Hey M.A.N

very nice!!!

Are you vacuum casting? VPC?

Thanks. Yes VPC.
A.Joa1
Novice
Posts:54
Joined:Sat Dec 03, 2016 11:43 am

Re: Casting SolusCast

Postby A.Joa1 » Fri Sep 29, 2017 9:37 am

Which one?

Topacast, Schultheiss, Galloni, Yasui?
wawatobi
Novice
Posts:71
Joined:Tue Nov 24, 2015 9:56 am

Re: Casting SolusCast

Postby wawatobi » Fri Sep 29, 2017 3:30 pm

Hi M.A.N.; Those look like the best casting yet. What is your max temp. and how long do you leave it there?
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Casting SolusCast

Postby rsaldivar » Fri Sep 29, 2017 5:57 pm

very nice casting

I do believe thin part resin models like those are easier to cure , not so long a cure , I say this to say that I believe the thicker the ring , the longer the cure, like a regular halo ring for example might take a little longer ,
no dought , what you are doing works well for you , Keep up the good job , I cant see any grow lines
M.A.N
Novice
Posts:39
Joined:Fri Apr 15, 2016 4:54 pm

Re: Casting SolusCast

Postby M.A.N » Fri Sep 29, 2017 8:51 pm

A.Joa1 wrote:Which one?

Topacast, Schultheiss, Galloni, Yasui?

Non of them. An Iranian VPC machine name HADAF.
wawatobi wrote:Hi M.A.N.; Those look like the best casting yet. What is your max temp. and how long do you leave it there?

Thanks. My max temp is 800 c. And stay 3 hours.
I mention again change your investment.
rsaldivar wrote:very nice casting

I do believe thin part resin models like those are easier to cure , not so long a cure , I say this to say that I believe the thicker the ring , the longer the cure, like a regular halo ring for example might take a little longer ,
no dought , what you are doing works well for you , Keep up the good job , I cant see any grow lines

Yes Its printing quality is great.
Attachments
DSC_0487.JPG
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Casting SolusCast

Postby M-Williams » Sat Sep 30, 2017 1:38 pm

MAN. you have to stay objective. I d'ont think a minute the bad casting results some people are encountering is due to Plasticast or Prestige Optima™ Investment. They have to step up and get a professional grade LED curing unit. some high definition resins are a pain to cure with a nail box. there is no magic into it. Marc.
M.A.N
Novice
Posts:39
Joined:Fri Apr 15, 2016 4:54 pm

Re: Casting SolusCast

Postby M.A.N » Sat Sep 30, 2017 3:28 pm

M-Williams wrote:MAN. you have to stay objective. I d'ont think a minute the bad casting results some people are encountering is due to Plasticast or Prestige Optima™ Investment. They have to step up and get a professional grade LED curing unit. some high definition resins are a pain to cure with a nail box. there is no magic into it. Marc.

As My cure unit is a simple 4 lamps nail box with 2 extra lamps i cant agree that all of bad castings is because of curing.
Its an important factor but investment is important too.
I remember i could cast envision ec500 simply with satin cast. Then i tried yo cast b9 resins with it. I had problem. Then i switched to prestige optima. My castings came out Great. Now im using synergy for my b9 and SC resins. They are coming out good.
Anyway These are my experiences in dealing with resins.
I shared them if it can help. I shared my previous cast completely here :
viewtopic.php?f=9&t=1029
I'll be glad to read and see your shared experiences here for making our work better.
Regards

Who is online

Users browsing this forum: No registered users and 1 guest