Hello,
If somebody have an experience with SolusArt Grey resin, would you be so kind to help me?
This is the first day I am trying to print this type of material and all of the prints have fallen down from the build platform with the basic settings.
Is there any special setting for that resin?
I used SolusProto without any mistake.
Thanks in advance!
Best regards,
Robert
SolusArt print failure
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: SolusArt print failure
Yes, there is a profile in contour.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: SolusArt print failure
Try increasing exposure time 0.5s
Re: SolusArt print failure
mongerdesigns wrote:Yes, there is a profile in contour.
Ok, thanks, I know, I tried with that. And it doesn't work for me at all.
But alread have spoken to Jordi, who helped me...
Who is online
Users browsing this forum: No registered users and 7 guests