We have been working tirelessly on developing our own castable resin. Still a work in progress but the results look promising.
Here is a nice ring that Len made and I printed on the Solus.
Haven't casted this piece, but the latest casted sample rings turned out good.
New Resin Development
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- CADjewelrySchool
- Novice
- Posts:71
- Joined:Wed Sep 16, 2015 10:28 am
Re: New Resin Development
Just had another look at these casts @ Monger. Are these using the new Blood/Claret Resin being developed for the Solus?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: New Resin Development
Yup. Maybe Ruby Red?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- CADjewelrySchool
- Novice
- Posts:71
- Joined:Wed Sep 16, 2015 10:28 am
Re: New Resin Development
Yes Emil/Mark. "Ruby Red" resin sounds like a great name
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Re: New Resin Development
i am running low on cherry, is it close enough to purchase, or should I buy more cherry and wait?
Is it tougher than the cherry? I have some support issues with cherry?
Toddmichael
Is it tougher than the cherry? I have some support issues with cherry?
Toddmichael
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: New Resin Development
Todd,
We haven't announced anything yet. This is just testing. When we are close to releasing the resin, we will make an official announcement.
Thanks.
We haven't announced anything yet. This is just testing. When we are close to releasing the resin, we will make an official announcement.
Thanks.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Re: New Resin Development
The resin looks great. I also like the images with the spruing left on, so I can see how others are doing it.
Its like learning a shortcut..
As soon as your ready with the new castable resin, send me a bill and I will pay, I am gearing up for the holiday and would need 2 bottles please.
Toddmichael
Its like learning a shortcut..
As soon as your ready with the new castable resin, send me a bill and I will pay, I am gearing up for the holiday and would need 2 bottles please.
Toddmichael
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
Re: New Resin Development
Has anything on this been finalized yet ...? I am looking for a printer to improve on the quality o get out of my b9 printing cherry ... As well as less of a headache dealing with pdms calibration
Is it possible yet to get a sample print in this material at 25 microns to see it in action for the types of pieces I do (pave microprongs)
Considering buying your printer if the results of both print and cast are good enough :.. Or print and mould
Is it possible yet to get a sample print in this material at 25 microns to see it in action for the types of pieces I do (pave microprongs)
Considering buying your printer if the results of both print and cast are good enough :.. Or print and mould
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: New Resin Development
Hi kbs765. Send me an email at info@junction3d.com
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 11 guests