I managed to find out the correct settings to put my grid straight, but unfortunately the distortion changes. So I have to find new settings each time I start to print. This is bad enough, but it seems the distortion changes even during the print job which causes curvy vertical lines. Has anyone ever had this problem? I do not find any posts concerning this topic. Is this issue caused by the computer or by the Beamer(vivitec)
Any suggestions are welcome.
Projector changes distortion
Re: Projector changes distortion
Hi,
I haven't seen this bug. Which version of Contour are you running? Which version of Windows?
I haven't seen this bug. Which version of Contour are you running? Which version of Windows?
Re: Projector changes distortion
I use windows10 and contour beta 1.1.7
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Projector changes distortion
Update to the latest version, then go to edit/preferences, choose your projector, press ok. That should fix the issue and save the settings.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Projector changes distortion
....done. I will update you with the results.
Re: Projector changes distortion
........this did not solve the problem. Grid distortiortion did change during the last print job. So what else can I try?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Projector changes distortion
when you change the values and exit the software. When you go back, did the values change to something else?
email me at info@junction3d.com and I can connect to your pc remotely and see if I can fix this for you.
email me at info@junction3d.com and I can connect to your pc remotely and see if I can fix this for you.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Projector changes distortion
The values did not change but the grid changed. So I will have to entre new values. I will contact you tomorrow for help.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Projector changes distortion
If that's the case, then it could be computer graphics card related. Are you using an HDMI cable or VGA?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Projector changes distortion
I use HDMI cable
Who is online
Users browsing this forum: No registered users and 44 guests