Sometimes my rings come out Oval shape but are easily pounded round once in medal...
Any Suggestions?
Oval Rings
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Oval Rings
Check your grid calibration and aspect ratio. You can also use the scale adjustment (file, setup, scale adjustment) to correct it.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Oval Rings
It could be that you need to add some extra supports if the ring is thin because when it starts pulling of the film the resin is still soft and it will get a bit oval
Who is online
Users browsing this forum: No registered users and 4 guests