I've seen several posts on this same topic, hoping for some extra help. I stopped a failed print in mid-stream, clean my vat and reloaded the print, unfortunately my printer would not home. I did a search on homing and read several possible solutions and followed them.
I did un-plug the USB, turned off the printer and pressed the rest button. I then reloaded the program and tried to re-home the printer, but it is stuck in the upper position and now working.
Are their any other solutions to getting the machine to home?
Thank you for any advice,
Joseph
Failure to home
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Failure to home
Please send and email to info@junction3d.com and we will get in touch with you on Monday to run some diagnostics.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 6 guests