Search found 292 matches

by rkundla
Fri Aug 03, 2018 5:45 am
Forum: Help and Troubleshooting
Topic: New laptop for souls
Replies: 9
Views: 6151

Re: New laptop for souls

Sagariz wrote:Mmm, this is the only inputs and outputs of my computer, I think it's not one of the ones that you comment.


Nope, that is one of them super slim machines, almost like for home theater use. Interesting that it actually has a HDMI input. :geek:
by rkundla
Thu Aug 02, 2018 9:20 pm
Forum: Help and Troubleshooting
Topic: New laptop for souls
Replies: 9
Views: 6151

Re: New laptop for souls

Sagariz wrote:Unfortunately the alienware is a desktop and only have 1 hdmi port for the screen


If you have a DVI connector on the Alienware machine, you can get a DVI->HDMI converter cable since I am guessing your desktop monitor is HDMI.
by rkundla
Wed Jul 25, 2018 4:09 am
Forum: Resins
Topic: Solus Wax Resin
Replies: 189
Views: 113442

Re: Solus Wax Resin

I was wondering if anyone here try to cast SolusWax in platinum? I have cast many different resins including EmeralGreen and SolusCast but with no luck ( I am not the caster, I do casting outside) Any advice i greatly appreciated! Thanks This is very strange, with phosfate based investments ( for p...
by rkundla
Sat Jun 30, 2018 6:08 pm
Forum: Resins
Topic: Solus Wax Resin
Replies: 189
Views: 113442

Re: Solus Wax Resin

That was quick. ;-)
by rkundla
Sat Jun 30, 2018 12:05 am
Forum: Software
Topic: 4K
Replies: 13
Views: 15795

Re: 4K

Lots of companies will take a loss on the hardware and make their money back on supplies if the margin is high. Look at HP and their printers as an example.
by rkundla
Wed Jun 27, 2018 9:40 pm
Forum: Casting
Topic: Whitegold - Castings with emerald resin
Replies: 28
Views: 31174

Re: Whitegold - Castings with emerald resin

We were able to improve the quality of our casting with a "new" burnout ( 1h30 min on 100 and up to 180 °C vor 1h30m before ramp up to 430( 9°C/min. - hold for 3 hours - ime where resin becomes soft and want to get out) and 3 hours at 800°C) So what was the total time to burn out before c...
by rkundla
Tue Jun 26, 2018 7:03 pm
Forum: Resins
Topic: Cracks in Emerald prints, need help!
Replies: 3
Views: 3105

Re: Cracks in Emerald prints, need help!

Since it didn't heal itself during printing, it could be lack of support causing stress on the part during exposure and then peel. That causes those pieces to shift back and forth during the printing process.
by rkundla
Wed Jun 06, 2018 9:43 pm
Forum: Resins
Topic: Solus Wax Resin
Replies: 189
Views: 113442

Re: Solus Wax Resin

The blue on the right is the latest that I was testing. On the left is the first one. Resolution is much better on the blue at 42. Prints great, casts great. another pic of a filigree in white gold. Came out great. So they are both SolusWax, just an earlier and a later iteration on the formula? The...
by rkundla
Mon Jun 04, 2018 4:37 pm
Forum: Casting
Topic: Erics paper on resin casting at the santa Fe Symposium
Replies: 16
Views: 18476

Re: Erics paper on resin casting at the santa Fe Symposium

Not all castable resins are receptive to boiling techniques unfortunately. Resins that use wax or a wax replacement (like Waxcast) could be damaged in boiling liquid. You may still need to UV cure the exterior to toughen it against the hot liquid. Unlike wax which has very specific properties, the u...
by rkundla
Fri Jun 01, 2018 5:05 pm
Forum: Gallery
Topic: DB Studio
Replies: 85
Views: 83154

Re: DB Studio

One more thing. Just shake well before use, it is not a stable resin. The chemistry of the cherry is somewhat different. I assume it got way more pigments than any other resin. Though the quality print is unique. I believe that Cherry is the most pigmented castable resin on the market. You have to ...