Glass lifted off frame .

Topics about Solus 3d Printer's hardware
Stanleyloo
Posts: 1
Joined: Tue Sep 18, 2018 8:49 am

Glass lifted off frame .

Postby Stanleyloo » Tue Sep 18, 2018 9:07 am

Hi user , anyone had this issue ? Glass lifted off frame. Can it just be glued back on with silicon ? Thx in advance .
Attachments
E8A8342B-F189-4C80-962E-092B49CD9F31.jpeg
User avatar
mongerdesigns
Solus Guru
Posts: 1942
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: Glass lifted off frame .

Postby mongerdesigns » Tue Sep 18, 2018 2:50 pm

The glass is removable for easy cleaning and replacement of it breaks. Shouldn’t come out by itself though. Use double sided lcd tape. 2mm. Sold on Amazon.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Jewelermdt
Solus Master
Posts: 804
Joined: Sun Jul 19, 2015 10:38 pm
Location: N.W. Florida
Contact:

Re: Glass lifted off frame .

Postby Jewelermdt » Wed Sep 19, 2018 2:44 am

Does it get hot where your printer is? Do you have a fan to blow the heat from projector away from printer? Heat is most likely the cause of the tape failing. BTDT
User avatar
mongerdesigns
Solus Guru
Posts: 1942
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: Glass lifted off frame .

Postby mongerdesigns » Wed Sep 19, 2018 5:36 pm

The only way the glass can pop off, is if you spilled some resin on it and the film got fused to it when printing and pulled off the glass. Which is very rare. Make sure the bottom of your film is cleaned and the glass is clean of any resin or residue.

If the glass does pop off, remove the existing tape, clean the glass on both sides, apply tape to the inside of the metal frame and reapply the glass.

https://www.amazon.com/YUYIKES-Adhesive ... 004WIQW3U/
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 3 guests